Call Now:
1300 676 996
Scroll Down For Further Information
Scroll Down For Further Information
Length (L) 26.4 in / 670 mm
Width (W) 44.9 in / 1,140 mm
Height (H) 20.9 in / 530 mm
Weight (WGT) 275.6 lb / 125 kg
Working Pressure 16 MPa
Length (L) 28.1 in / 715 mm
Width (W) 24.2 in / 615 mm
Height (H) 10.6 in / 270 mm
Weight (WGT) 154.3 lb / 70 kg
Torque 2900 Nm
Motor Displacement 100 ml/r
Recommended Traffic 30-70 L/min
Continuous Pressure 170 bar
Maximum Flow 75 lpm @ 200 bar (L/min)
Maximum Pressure 210 bar @ 60 lpm (bar)
Drill Pipe Size 4/6/8/10/…/20 in 100/150/200/250/…/500 mm
Length (L) 38.6 in/ 980 mm
Width (W) 24.5 in/ 622 mm
Height (H) 29.5 in / 750 mm
Weight (WGT) 194 lb / 88 kg
Capacity 0.2 m³
Length (L) 28.1 in / 715 mm
Width (W) 24.2 in / 615 mm
Height (H) 10.6 in / 270 mm
Weight (WGT) 154.3 lb / 70 kg
Specification of Mixing Tank
Height (mm) 27.6 in / 700 mm
diameter 23.6 in / 600 mm
Weight (WGT) 77.2 lb / 35 kg
Capacity 0.2 m³
Length (L) 27 in / 685 mm
Width (W) 52.6 in / 1,336 mm
Height (H) 19.7 in / 500 mm
Weight (WGT) 330.7 lb /150 kg
Swing Angle ±30°
Length (L) 31.9 in / 810 mm
Width (W) 47.6 in / 1,210 mm
Height (H) 46.9 in / 1,190 mm
Weight (WGT) 1168.4 lb / 530 kg
Working Width 36.2 in / 920 mm
Drum Diameter (with teeth) 13 in / 330 mm
Min Flow Rate 15.9 gal/min / 60 L/min
Tooth Material 20CrMnTi
Number of Teeth 25
Push Rod Cylinder Qty 2
Cylinder Bore/Rod Diameter 1.26/0.71 in / 32/18 mm
Length (L) 30.7 in / 780 mm
Width (W) 33.5 in / 850 mm
Height (H) 22.8 in / 580 mm
Weight (WGT) 242.5 lb / 110 kg
Upper Teeth Spacing 5.8 in / 146.6 mm
Middle Tooth Thickness 0.24 in / 6 mm
Side Tooth Thickness 0.39 in / 10 mm
Opening Size 28.4 in / 720 mm
Length (L) 52.4 in / 1,330 mm
Width (W) 24.4 in / 620 mm
Height (H) 13 in / 330 mm
Weight (WGT) 265 lb / 120 kg
Chisel Diameter 1.8 in / 45 mm
Operating Weight 2,645–6,614 lb / 1.2–3 t
Impact Frequency 700 – 1,200 bpm
| Length (L) | 29.9 in / 760 mm | |
| Width (W) | 25.6 in / 650 mm | |
| Height (H) | 32.7 in / 830 mm | |
| Opening Size | 35.4 in / 900 mm |
| Length (L) | 40.4 in / 1,025 mm | |
| Width (W) | 39.4 in / 1,000 mm | |
| Height (H) | 26.4 in / 670 mm | |
| Weight (WGT) | 169.8 lb / 77 kg | |
| Load Capacity | Varies by machine | |
| Fork Length | 42.1 in / 1,070 mm |
| Length (L) | 20.5 in / 520 mm | |
| Width (W) | 24.8 in / 630 mm | |
| Height (H) | 12.4 in / 315 mm | |
| Digging Depth | 7.9 in / 200 mm | |
| Plate Thickness | 0.79 in / 20 mm | |
| Tooth Material | Cast Steel |
Length (L) 24 in / 610 mm
Width (W) 46 in / 1,168 mm
Height (H) 13.6 in / 345 mm
Weight (WGT) 143.3 lb / 65 kg
Teeth Spacing 1.9 in / 49 mm
Tooth Thickness 0.24 in / 6 mm
Length (L) 50.4 in / 1280 mm
Width (W) 50.8 in / 1290 mm
Height (H) 26.8 in / 680 mm
Weight (WGT) 683.4 lb / 310 kg
Working Width 45.3 in / 1150 mm
Working Depth 0–5.5 in / 0-140 mm
Blade Quantity 28 Pcs
Roller Width (W’) 59.4 in / 1510 mm
Mesh Size 2.4 × 1.2 in 60 x 30 mm
Recommended Flow 11.9–23.8 gal/min
| Length (L) | 48.8 in / 1,240 mm | |
| Width (W) | 24.4 in / 620 mm | |
| Height (H) | 51.2 in / 1,300 mm | |
| Weight (VGT) | 485 lb / 220 kg | |
| Opening Size | 35 in / 890 mm |
Length (L) 45.5 in / 1,155 mm
Width (W) 28 in / 710 mm
Height (H) 22 in / 560 mm
Weight (WGT) 407.9 lb / 185 kg
Swing Angle 60°C
Capacity 0.15 m³
| Length (L) | 36.8 in / 935 mm | |
| Width (W) | 37.8 in / 960 mm | |
| Height (H) | 23.6 in / 600 mm | |
| Weight (WGT) | 242.5 lb / 110 kg | |
| Top Tine Thickness | 0.39 in / 10 mm | |
| Top Tine Spacing | 10.5 in / 267 mm | |
| Lower Tine Thickness | 0.31 in / 8 mm | |
| Lower Tine Total Width | 37.8 in / 960 mm | |
| Opening Size | 29.5 in / 750 mm |
Diameter 13.8 in / 350 mm
Length (L) 26.6 in / 675 mm
Shaft Diameter 2.6 in / 65 mm (Round)
Weight (WGT) 72.8 lb / 33 kg
Motor Type Cycloidal motor
Displacement 230 cc
Max. Intermittent Pressure 241 bar
– with Planetary Reducer
Rotational Speed 90 rpm
Torque 2,200 Nm / 19,384 lb-in
| Diameter | 2 in / 50 mm | |
| Load Capacity | 5,000 lb / 2,268 kg |
| Length (L) | 72.8 in / 1,850 mm | |
| Width (W) | 33.5 in / 850 mm | |
| Height (H) | 29.5 in / 750 mm | |
| Weight (WGT) | 472 lb / 214 kg | |
| Max Trenching Depth | 35.4 in / 900 mm | |
| Trenching Width | 3.9/5.9/7.9/9.8/11.8 in 100/150/200/250/300 mm |
Auger Torque – Pallet Forks – 1800KG
150 mm Auger Bit
200 mm Auger Bit
300 mm Auger Bit
400 mm Auger Bit
450 mm Auger Bit
900 mm Trencher inc Hose & Backing Plate
Auger kit includes drive, 200 mm, 300 mm, 400 mm bits 4 way swing hoses and implement rack set up on our trailer
Auger Kit Suit King T15 Super Mini, T25 or King T35 includes 300mm bit hose and 4 way swing
Length (L) 26.4 in / 670 mm
Width (W) 44.9 in / 1,140 mm
Height (H) 20.9 in / 530 mm
Weight (WGT) 275.6 lb / 125 kg
Working Pressure 16 MPa
Length (L) 30.7 in / 780 mm
Width (W) 33.5 in / 850 mm
Height (H) 22.8 in / 580 mm
Weight (WGT) 242.5 lb / 110 kg
Upper Teeth Spacing 5.8 in / 146.6 mm
Middle Tooth Thickness 0.24 in / 6 mm
Side Tooth Thickness 0.39 in / 10 mm
Opening Size 28.4 in / 720 mm
Length (L) 24 in / 610 mm
Width (W) 46 in / 1,168 mm
Height (H) 13.6 in / 345 mm
Weight (WGT) 143.3 lb / 65 kg
Teeth Spacing 1.9 in / 49 mm
Tooth Thickness 0.24 in / 6 mm
Length (L) 45.5 in / 1,155 mm
Width (W) 28 in / 710 mm
Height (H) 22 in / 560 mm
Weight (WGT) 407.9 lb / 185 kg
Swing Angle 60°C
Capacity 0.15 m³
1290T Trencher
830mm
Concrete Mixer inc Drive Hose & Stand
Fixed Backhoe inc Backing Plate & Hoses
Heavy Duty Forks inc Backing Plate
Jib, Tow Bar, Multi Function Lift
Lawn Mower
Log Grabber inc Backing Plate & Hoses
Ripper
Rock Breaker Including Hoses
Rock Bucket
Rotary Hoe
Rotating Log Grab
Slewing Backhoe inc Backing Plate & Hoses
Spreader Bar
Stump Grinder
Sweeper
Sweeper with Collection Bucket
Wood Chipper
For further information about our range of products and prices, please enter your details in the form below to get access to instant pricing and the opportunity to have the information package posted out to you.
